Custom Edge Finish & Polishing Information:
We offer a variety of customization options and edge polishing methods for our acrylic mirror sheets. For a glossier edge select an option with polished edges. Soften the edges of your custom cut mirror sheets with beveled or rounded edges or radius/rounded corners.
Have additional questions about any of these options? Contact our team at Acme Plastics for more information on our acrylic edge polishing and finishing options.
Custom Hole Information:
You can choose to add holes to your acrylic mirror sheet. After entering your desired number of holes, select from the available hole sizes using the drop down menu above.
Dimension Information:
Standard Cut-to-Size length and width tolerances for acrylic mirror panels are +/-1/8", although a typical mirror sheet will be more precise. If you or your team acquires a greater degree of accuracy, please contact our team. Our acrylic mirror sheet thickness tolerances are +/- 10% and can vary throughout the sheet, but differences are typically less than 5%. Please refer to nominal and actual sheet thicknesses below.
0.06" = 1.5mm
1/8" = 3mm = 0.118"
1/4" = 5.5mm = 0.217"
Custom Cut Mirror Use Cases
- Hang a mirror on a wall opposite featured artwork to reflect the beautiful art piece.
- Create custom mirrored cabinets or furniture to make a space feel larger and add depth to the room.
- Add a custom cut mirror above a bathroom vanity to fit the space perfectly. Make it stand out by adding LED lighting behind the mirror.
- Use a custom mirror sheet on a table top to add modern flair to the room.
- Place a mirror in your entryway to create a sense of space and add a warm welcome.
- Hang a custom cut mirror close to a window to increase the natural lighting in the room through reflecting the sunshine.
- Add a floor-to-ceiling mirror in a gym to provide a full view of your workout.
Frequently Asked Questions:
How much is a custom cut mirror?
The cost of a custom cut mirror at Acme Plastics can vary depending on the size, thickness, and type of mirror you choose. Additionally, prices may differ based on where you purchase the mirror and the level of customization required. Generally, custom cut mirrors can range from $50 to several hundred dollars or more, depending on the specifications.
Can I get a mirror cut to size?
Yes, you can get a mirror cut to size. At Acme Plastics we offer custom cutting services, allowing you to select the specific dimensions you need to fit your space perfectly.
How do professionals cut mirrors?
Professionals typically use specialized tools and equipment to cut mirrors accurately and safely. The process involves the following steps: Measuring, marking, cutting, breaking, and smoothing.
How do you cut a large mirror?
To cut a large acrylic mirror, measure and mark the desired size on the protective film covering the mirror. Apply masking tape along the cutting line on both sides of the mirror to prevent chipping. Use an appropriate acrylic cutting tool, such as a circular saw with a fine-toothed blade, to cut along the marked line slowly and carefully.
How likely are the mirrors to break during shipping?
To reduce the risk of breakage, our team at Acme Plastics use proper packaging materials, such as sturdy boxes, foam, and protective corner covers, to secure the mirror during shipping.
Resources
