Cut-to-Size Clear Acrylic Sheet - Cast
Processing...

Cut-to-Size Clear Acrylic Sheet - Cast

Code: CUT-TO-SIZE-ACRYLIC-CAST-CLEAR-SHEET

Select your options and quantity to view pricing
Increasing quantity may qualify for a lower unit price
and
and

 

Options:

 

Holes Per Sheet ? Holes:

A dimensioned drawing or sketch with hole placement is required. Please indicate hole position as the distance from the center of the hole to the sheet edge. Please note that hole edges are not polished.

You will receive an email with further instructions upon receipt of your order.

There is a minimum order quantity of units. Please check your selection.
Minimum Order Quantity: Units
For Standard Size Clear Cast Acrylic Sheets Click Here
Select all options and quantity to request a quote
Choose from the options above to order custom cut-to-size Clear Acrylic (Plexiglass) Sheets. After dimensions are selected an updated price per custom size sheet will be displayed.

Custom Edge Finish & Polishing Information: 

We offer a variety of customization options and edge polishing methods for our acrylic sheets. For a glossier edge select an option with polished edges. Soften the edges of your acrylic sheets with beveled or rounded edges or radius/rounded corners. 

Have additional questions about any of these options? Contact our team at Acme Plastics for more information on our acrylic edge polishing and finishing options. 

Custom Hole Information: 

You can choose to add holes to your acrylic sheet. After entering your desired number of holes, select from the available hole sizes using the drop down menu above. 

Dimension Information:

Standard Cut-to-Size length and width tolerances are +/-1/8", but are typically more accurate. Please contact us if you need greater precision.


Return Policy Information: 

Cut-to-size products are CUSTOM and therefore NON-RETURNABLE. 
Write a Review
Customer Ratings & Reviews

Acrylic Sheet Thickness Information

Tolerances for acrylic sheet thickness are +/- 10% and these tolerances can differ throughout the panel. Variations are however often less than 5%. Below we have listed out nominal and actual sheet thicknesses:

  • 0.06" acrylic sheet = 1.5mm acrylic sheet
  • 0.08" acrylic sheet = 2mm acrylic sheet
  • 0.09" acrylic sheet = 2.3mm acrylic sheet
  • 0.098" acrylic sheet = 2.5mm acrylic sheet
  • 1/8" acrylic sheet = 3mm acrylic sheet = 0.118" acrylic sheet
  • 3/16" acrylic sheet = 4.5mm = 0.177" acrylic sheet
  • 1/4" acrylic sheet = 5.5mm acrylic sheet = 0.217" acrylic sheet
  • 3/8" acrylic sheet = 9mm acrylic sheet = 0.354" acrylic sheet
  • 1/2" acrylic sheet = 12mm acrylic sheet = 0.472" acrylic sheet
  • 3/4" acrylic sheet = 18mm acrylic sheet = 0.709" acrylic sheet
  • 1" acrylic sheet = 24mm acrylic sheet = 0.945" acrylic sheet
  • 1.25" acrylic sheet = 30mm acrylic sheet = 1.18" acrylic sheet
  • 1.5" acrylic sheet = 38mm acrylic sheet = 1.50" acrylic sheet
  • 2" acrylic sheet = 50mm acrylic sheet = 1.97" acrylic sheet
  • 2.5" acrylic sheet = 60mm acrylic sheet = 2.36" acrylic sheet
  • 3" acrylic sheet = 75mm acrylic sheet = 2.95" acrylic sheet

Cast Acrylic is transparent, moisture resistant and half the weight of glass but 17 times stronger. Cast acrylic or plexiglass has a higher molecular weight than extruded acrylic, making it a better choice for shaping, machining and laser cutting. Common uses for Cast Acrylic are signage, aquariums, POP displays and furniture. Acme Plastics has Cut-to-Size Clear Cast Acrylic Sheets.
Tell a friend about Cut-to-Size Clear Acrylic Sheet - Cast

Contact Customer Service about Cut-to-Size Clear Acrylic Sheet - Cast